Wall Mounting Enclosure PT With Double Door
The enclosure comes with a mounting plate, locking system, gland plate, sealing gasket, and fixing accessories. With an IP66 protection rating, it is suitable for installations requiring protection against dust and powerful water jets under specified test conditions.
Wall Mounting Enclosure PT with Double Door Technical Specifications
| MODEL | H | W | D | Gland Plate | MODEL | H | W | D | Gland Plate |
| PTD6820 | 600 | 800 | 200 | 2D | PTDD6820 | 600 | 800 | 200 | 2D |
| PTD6830 | 600 | 800 | 300 | 2D | PTDD6830 | 600 | 800 | 300 | 2D |
| PTD61020 | 600 | 1000 | 200 | 2D | PTDD61020 | 600 | 1000 | 200 | 2D |
| PTD61230 | 600 | 1200 | 300 | 2D | PTDD61230 | 600 | 1200 | 300 | 2D |
| PTDD101025 | 1000 | 1000 | 250 | 2E | PTDD101025 | 1000 | 1000 | 250 | 2E |
| PTD101030 | 1000 | 1000 | 300 | 2E | PTDD101030 | 1000 | 1000 | 300 | 2E |
| PTDD121225 | 1200 | 1200 | 250 | 2E | PTDD121225 | 1200 | 1200 | 250 | 2E |
| PTDD121030 | 1200 | 1000 | 300 | 2E | PTDD121030 | 1200 | 1200 | 300 | 2E |
| PTD121240 | 1200 | 1200 | 400 | 2E | PTDD121240 | 1200 | 1200 | 400 | 2E |
| PTD141030 | 1400 | 1000 | 300 | 2E | PTDD141030 | 1400 | 1000 | 300 | 2E |
| PTD141230 | 1400 | 1200 | 300 | 2E | PTDD141230 | 1400 | 1000 | 300 | 2E |
| PTD141240 | 1400 | 1200 | 400 | 2E | PTDD141240 | 1400 | 1200 | 400 | 2E |
Wall Mounting Enclosure PT with Double Door Features
- Double Door Structure
The double-door configuration provides front access to the internal equipment compartment, supporting component installation, inspection, and maintenance.
- PU Foam Sealing Gasket
A PU foam sealing gasket is fitted inside the door to create a seal between the door and enclosure body, helping maintain the specified ingress protection.
- 130° Door Opening
Pin-type hinges allow the door to open up to 130°, providing access to internal components during installation and servicing.
- Slotted Enclosure Edge
The formed enclosure edge works with the sealing gasket to help prevent dust and water ingress when the door is properly closed.
- Reinforced Door Design
For enclosures above 600 mm in height, strengthening strips with pre-drilled mounting holes are welded to both sides of the door to facilitate component installation using M4 self-tapping screws.
- Wall Mounting and Bottom Cable Entry
Four pre-punched hanging holes on the rear panel simplify wall mounting. The bottom gland plate includes a sealing gasket to help maintain the enclosure's IP66 protection when correctly installed.
Standard Accessories Included
Each PT double door wall mounting enclosure is supplied with the following standard components:
- Mounting Plate: Provides a surface for fixing electrical components.
- Locking System: Secures the enclosure doors when closed.
- Bottom Gland Plate: Provides an entry area for electrical cables.
- Sealing Gaskets: Support sealing at the door and gland plate interfaces.
- Fixing Accessories: Support enclosure installation according to the supplied configuration.
FAQ
How Do I Choose Between a Single Door and Double Door Enclosure?
The choice depends on the enclosure dimensions, internal equipment arrangement, and available access space. Double-door designs can be useful for wider enclosures where access to different sections of the internal equipment is required. Check the installation area and door clearance before selecting a model.
How Much Space Is Required in Front of a Wall-Mounted Enclosure?
Allow sufficient clearance for the doors to open fully and for technicians to install, inspect, and service electrical components. For the PT double door enclosure, consider the door opening angle and the space needed to handle internal equipment safely.
Can Electrical Components Be Installed Before the Enclosure Is Delivered?
Pre-installation may be possible depending on the project scope and the supplier's available services. Provide the component layout, mounting-hole positions, wiring requirements, and relevant drawings for a feasibility review before confirming the order.
What Should Be Considered When Planning Cable Entry?
Determine the number, diameter, and routing direction of incoming cables before installation. Cable glands and openings should be compatible with the cable sizes and installation requirements. Any additional openings must be properly sealed to preserve the required enclosure protection.
Hot Tags: wall mounting enclosure pt with double door, China, manufacturers, suppliers, factory, customized, wholesale
You Might Also Like
Send Inquiry