MOBILE: +8618768291777

E-MAIL: marco@prota.cn

Anji Huacheng Electrics Co.,Ltd

Search

Home > Knowledge > Content
Cantilever control box processing technology
Jan 02, 2019

With the development of the cantilever control box, people are increasingly demanding it. The past cantilever control box has been unable to meet the needs of the contemporary. In order to make the cantilever control box meet the needs of most people. The cantilever control box manufacturer has to make fine adjustments to the processing technology of the cantilever control box.

The stamping process is a very important process in the production of cantilever control boxes. When the cantilever control box is subjected to the stamping process, the surface of the cantilever control box may be as uneven as the surface of the orange peel, making the surface very rough. If the surface has a very deep concave-convex shape, some cantilever control box manufacturers will use paint repeatedly to cover it. However, the finish of the painted surface is generally not good. Therefore, the choice of the manufacturer of the cantilever control box is crucial.

Manufacturers of high-quality cantilever control boxes often spray a layer of atomized putty when the surface of the cantilever control box is rough, or use a sander to clean it. Thereby the surface finish of the cantilever control box is very high. After the cantilever control box has been processed through a series of processes, we have not really completed it. We will also face assembly problems with it. In particular, the cantilever control box that requires a link should be of particular concern.

For the technology of the cantilever control box, we must continue to improve according to the requirements of the times to meet the needs of most people. In order to ensure that our customers continue to rise. Different sheets sometimes use different ways of linking. For thin-plate structural parts with t<=2mm, we only connect them with argon arc welding or carbon dioxide protection welding. For those joints that affect the appearance, we have to polish them before joining. Under the premise of not affecting the appearance, the joint seam should be polished when it is 1.5mm above the plane; the inner corner should not be used at the corner, and the round corner of <=R2 should be polished. When welding the parts such as the door and the insert box, it is necessary to ensure that the connection can be assembled after the connection.


Related Industry Knowledge