Metal Enclosures

There are strengthening strips with pilot holes is welded to both sides of the door by using the self-tapping M4 screws for the convenient installation (If the enclosure higher than 600mm). The

distribution box standard configuration:. Enclosure and door. Mounting plate. Bar Lock. Polyurethane door seal. Cable gland plate and gasket

Model NO.: PTP. Structure: Protection. Form: Partly-welded Type. Shell Material: Steel Plate

Please contact us for more information.

Enclosure manufactured from 1.5 mm thick sheetsteel. Reversible door provided with 4.0 mm transpar-ent plexiglas sheet and manufactured from 1.5 mmthick sheet steel up to H=800 mm; for box H>800,door

Appplication . 1.enclosure and door. 2.mounting plate. 3.lock system. 4.gland plate,sealing gasket and fixing accessories

1. Standard configuration: mounting plate, locking system, gland plate, sealing gasket and fixing accessories.. 2.Material and thickness: cold-rolled sheet steel. Door: 1.2mm or 1.5mm. Body: 1.5mm or

Standard Configuration. Surface: Epoxy thermosetting powder coating, textured finish. Protection Degree: the DIN RAIL IP20. Standard configuration: Framework of enclosure with DIN rails. The front

The SS Series electrical enclosures are designed to house electrical controls, instruments and components in areas, which may be regularly hosed down or are in very wet or oily conditions. These