UL Listed Floor Standing Electrical Cabinet PR8
UL Listed Floor Standing Electrical Cabinet PR8 Structural Design & Modular Installation
One-Piece Welded Cabinet Structure
The PR8 uses a one-piece floor-standing cabinet structure with welded section profiles, providing a rigid framework for the enclosure body, door, and internal mounting system. This construction is designed for independent cabinet installation rather than parallel cabinet assembly.
25 mm Modular Hole System
The cabinet incorporates a 25 mm modular hole spacing system, providing standardized fixing positions for internal mounting components and accessories. This allows the installation layout to be adjusted more easily according to different electrical equipment configurations.
Front-Accessible Galvanized Mounting Plate
The 2.5 mm galvanized mounting plate can be inserted into the cabinet from the front. Its U-shaped folded sides provide a defined mounting structure while making handling and installation more practical during panel assembly.
Raised Front Door Structure
The front door is positioned 25 mm above the floor, providing clearance between the lower door section and the installation surface. This helps prevent interference when opening the door while maintaining the overall floor-standing cabinet structure.
PR8 Configuration & Engineering Customization
- Cabinet Dimensions & Structural Configuration
The PR8 can be configured according to required width, height, and depth, with cabinet panels, doors, base structure, and internal clearances matched to the installed electrical equipment.
- Mounting System & Internal Layout
The 25 mm modular hole system can be used to arrange mounting plates, support components, DIN rails, and other internal accessories according to the equipment layout and wiring requirements.
- Panel Machining & Cable Entry
Door and panel openings can be processed for HMI units, meters, switches, indicators, cable glands, and connectors, with cable entry positions coordinated with the internal wiring arrangement.
- UL Project Configuration
For UL-listed projects, enclosure materials, structural components, hardware, grounding provisions, and other relevant features can be reviewed against the applicable project requirements before production.
FAQ
Is the PR8 designed as a single cabinet or a modular cabinet system?
The PR8 is designed as an independent cabinet for standalone electrical equipment installation. It is not intended as a standard configuration for connecting multiple cabinets side by side.
How is the mounting plate installed?
The mounting plate can be inserted into the cabinet from the front. Its folded side structure provides a defined support arrangement and allows the plate to be positioned within the cabinet before electrical components are installed.
Can the cabinet accommodate heavy electrical components?
The allowable equipment load depends on the cabinet dimensions, mounting plate configuration, component distribution, and fixing method. Heavy components should be positioned and secured according to their actual weight and mounting requirements.
How should the cabinet be positioned during installation?
The cabinet should be installed on a level, structurally suitable floor with sufficient space for door opening, cable connection, equipment access, and maintenance around the cabinet.
Hot Tags: ul listed floor standing electrical cabinet pr8, China, manufacturers, suppliers, factory, customized, wholesale, Control panel protection box, Floor Type Electric Cabinet, Metal enclosures for industrial use, Outdoor protection enclosures, PR8 One Piece Cabinet, Sturdy metal boxes for electronics
You Might Also Like
Send Inquiry